GNSS reference station quality plots
Vändra reference station
Skyplot
| November | December | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 25 | 26 | 27 | 28 | 29 | 30 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 |
Signal quality graphs
Data from last 30 days
Graph last updated 26.12.2024 20:44:49
The number of satellites indicates how many satellites are visible to the reference station within one hour.
Graph last updated 26.12.2024 20:44:49
Signal-to-Noise Ratio (SNR) indicates the quality of the signal received from the satellite to the reference station. A value between 38-54 dB is considered good. Otherwise, it may indicate signal interference.
Graph last updated 26.12.2024 20:44:49
The Position Dilution of Precision (PDOP) provides an estimation of the accuracy of three-dimensional positioning relative to the observation point (reference station). It combines the values of HDOP (Horizontal Dilution of Precision), which assesses horizontal accuracy, and VDOP (Vertical Dilution of Precision), which assesses vertical accuracy. Satellite geometry is considered good when the PDOP value is below 5.
Graph last updated 26.12.2024 20:44:48
The Geometric Dilution of Precision (GDOP) indicates an estimation where all DOP values (PDOP, Time Dilution of Precision (TDOP) arising from clock errors, and User Equivalent Range Error (UERE) due to pseudorange errors) are combined.
Graph last updated 26.12.2024 20:44:49
The number of cycle slips indicates how many times the satellite signal has been interrupted with the reference station within one hour. The interruption may be caused by obstacles between the reference station and the satellite (such as trees, buildings, etc.), rapid changes in ionospheric conditions, reflected signals, high levels of signal-to-noise ratio, or a low satellite elevation angle relative to the horizon (the satellite "rising" or "setting").
Graph last updated 26.12.2024 20:44:49
Recorded vs expected observations (ratio) indicates the percentage of resolving the initial unknowns, which ideally should range between 95-100%. This statistical estimate can be used to verify the solution of the vector network.
Graph last updated 26.12.2024 20:44:49
The interference by multipath refers to the type of signal’s path extension in centimeters caused by reflected signals. Reflected signals do not come directly to the reference station from the satelliite, but takes a more complex path, either through single or multiple reflections from different surfaces. The main sources of error stem from low-elevation satellites and reflecting surfaces.
Graph last updated 26.12.2024 20:44:49
The interference by multipath refers to the type of signal’s path extension in centimeters caused by reflected signals. Reflected signals do not come directly to the reference station from the satelliite, but takes a more complex path, either through single or multiple reflections from different surfaces. The main sources of error stem from low-elevation satellites and reflecting surfaces.
Graph last updated 26.12.2024 20:44:49
The interference by multipath refers to the type of signal’s path extension in centimeters caused by reflected signals. Reflected signals do not come directly to the reference station from the satelliite, but takes a more complex path, either through single or multiple reflections from different surfaces. The main sources of error stem from low-elevation satellites and reflecting surfaces.
Graph last updated 26.12.2024 20:44:48
The interference by multipath refers to the type of signal’s path extension in centimeters caused by reflected signals. Reflected signals do not come directly to the reference station from the satelliite, but takes a more complex path, either through single or multiple reflections from different surfaces. The main sources of error stem from low-elevation satellites and reflecting surfaces.